Violation Detail
Standard Cited: 19100134 F01 Respiratory Protection.
Inspection Nr: 1710847.015
Citation: 01002D
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/08/2024
Nr Instances: 1
Nr Exposed: 4
Abatement Date:
Gravity: 10
Report ID: 0830600
Contest Date:
Final Order: 06/07/2024
Related Event Code (REC):
Emphasis:
Substance: 9000
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 06/07/2024 | $0.00 | Other | ||
Penalty | Z: Issued | 05/08/2024 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 002D Hazard:
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): a.) On or about November 29, 2023, and at times prior, the employer did not provide fit tests for employees who were required to wear 3M half-face respirators or 3M N-95s in the workplace. Employees in the saw cutting area were observed wearing N-95s and an employee near the Pug Mill was wearing a half-face respirator; there were no fit tests completed, exposing employees to silica inhalation hazards. Abatement Note: Abatement certification and documentation are required for this item (see enclosed Certification of Corrective Action Worksheet).