Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1288984.015
Citation: 01002D
Citation Type: Serious
Abatement Date: 07/27/2018 2
Initial Penalty: $116,402.00
Current Penalty: $0.00
Issuance Date: 07/02/2018
Nr Instances: 4
Nr Exposed: 3
Related Event Code (REC):
Gravity: 10
Report ID: 0419700
Contest Date: 07/24/2018
Final Order: 05/17/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/17/2019 | $0.00 | 07/27/2018 | Serious | |
| Penalty | C: Contested | 07/30/2018 | $116,402.00 | 07/27/2018 | Willful | |
| Penalty | Z: Issued | 07/02/2018 | $116,402.00 | 07/27/2018 | Willful |
Text For Citation: 01 Item/Group: 002D Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. On or about January 25, 2018, in the south side of the machine shop, the Monarch Lathe ELMO1 did not have a chuck guard, exposing employees to a amputation hazard. b. On or about January 25, 2018, in the south side of the machine shop, the Monarch Lathe EL-02 did not have a chuck guard, exposing employees to a amputation hazard. c. On or about January 25, 2018, in the south side of the machine shop, the Kingston Lathe EL-09 did not have a chuck guard, exposing employees to a amputation hazard. d. On or about January 25, 2018, in the south side of the machine shop, the 10 inch South Bend Quick Change Gear Lathe EL-06 did not have a chuck guard, exposing employees to a amputation hazard.