Translate
Violation Detail
Standard Cited: 19100029 B01 Fall protection systems and falling object protection-criteria and practices.
This violation item has been deleted.
Inspection Nr: 1206035.015
Citation: 01002D
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 07/20/2017
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 5
Report ID: 0213900
Contest Date: 08/04/2017
Final Order: 12/29/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 12/29/2021 | $0.00 | Serious | ||
| Penalty | C: Contested | 08/07/2017 | $0.00 | Serious | ||
| Penalty | Z: Issued | 07/20/2017 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 002D Hazard:
29 CFR 1910.29(b)(1): The top edge height of top rails, or equivalent guardrail system members, were not 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking working surface; where the top edge height exceeded 45 inches (114 cm), the guardrail system did not meet all other criteria of paragraph (b) of this section (see Figure D-11 of this section): a) 9000 River Rd, Delair, NJ, 08110- Shipping, Buildings 3-11: Employees accessed areas including, but not limited to, the shipping area loading docks, where guardrails were in excess of 45 inches. The fall protection systems in place did not meet the requirements of the standard, observed on or about 1/24/2017. NOTE: BECAUSE ABATEMENT OF THIS VIOLATION IS ALREADY DOCUMENTED IN THE CASE FILE, THE EMPLOYER NEED NOT SUBMIT CERTIFICATION OR DOCUMENTATION OF ABATEMENT OF THIS VIOLATION AS NORMALLY REQUIRED BY 29 CFR 1903.19.