Translate
Violation Detail
Standard Cited: 19100147 D02 The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 994471.015
Citation: 01002C
Citation Type: Serious
Abatement Status:
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 02/02/2015
Nr Instances: 5
Nr Exposed: 2
Abatement Date: 02/27/2015
Gravity: 10
Report ID: 0418100
Contest Date:
Final Order: 02/26/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/26/2015 | $0.00 | 02/27/2015 | Serious | |
| Penalty | Z: Issued | 02/02/2015 | $0.00 | 02/27/2015 | Serious |
Text For Citation: 01 Item/Group: 002C Hazard:
29 CFR 1910.147(d)(2): An orderly shutdown of machine or equipment was not utilized to avoid any additional or increased hazards to employees as a result of equipment stoppage. On or about August 27, 2014 at 2345 Murphy Blvd., employees performing set-up and tool changes do not perform LOTO, the equipment includes, but is not limited to the following: a. E-18, employees performing set up and tool changes on the E-18 are exposed to an amputation hazard. During these operations the employees seldom turn the machines off to perform setup and tool changes. b. E-23, employees performing set up and tool changes on the E-23 are exposed to an amputation hazard. During these operations the employees seldom turn the machines off to perform setup and tool changes. c. P-17, employees performing set up and tool changes on P-17 are exposed to an amputation hazard. During these operations the employees seldom turn the machines off to perform setup and tool changes.. d. P-18, employees performing set up and tool changes on the P-18 are exposed to an amputation hazard. During these operations the employees seldom turn the machines off to perform setup and tool changes. e. P-14, employees performing set up and tool changes on P-14 are exposed to an amputation hazard. During these operations the employees seldom turn the machines off to perform setup and tool changes.