Violation Detail
Standard Cited: 19261153 I02 I
Inspection Nr: 1780380.015
Citation: 01002C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 11/27/2024
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 02/14/2025
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 12/17/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/17/2024 | $0.00 | 02/14/2025 | Serious | |
| Penalty | Z: Issued | 11/27/2024 | $0.00 | 01/02/2025 | Serious |
Text For Citation: 01 Item/Group: 002C Hazard:
29 CFR 1926.1153(i)(2)(i):Employee information and training. The employer shall ensure that each employee covered by this section can demonstrate knowledge and understanding of at least the following: A) The health hazards associated with exposure to respirable crystalline silica; B) Specific tasks in the workplace that could result in exposure to respirable crystalline silica; C)Specific measures the employer has implemented to protect employees from exposure to respirable crystalline silica, including engineering controls, work practices, and respirators to be used; D) The contents of this section; E) The identity of the competent person designated by the employer in accordance with paragraph (g)(4) of this section; and a) On or about September 25, 2024, the employer had not trained or provided employees with the information required by this section prior to allowing them to use a Husqvarna K770 Power Cutter and Bosch BH2770VC Turbo Jackhammer, to cut concrete floor indoors to install plastic drain pipe.
Translate