Translate
Violation Detail
Standard Cited: 19100305 G02 III Wiring methods, components, and equipment for general use.
Inspection Nr: 1594653.015
Citation: 01002C
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/30/2022
Nr Instances: 1
Nr Exposed: 1
Abatement Date:
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 11/03/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/03/2022 | $0.00 | Serious | ||
| Penalty | Z: Issued | 09/30/2022 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 002C Hazard:
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws. On or about May 10, 2022, at an establishment located at 1102 Jefferson Street in Algoma, Wisconsin, in the Finishing Department; the employer did not ensure that two flexible cords connected to a Tripp-Lite SmartPro 120V Line-Interactive Uninterrupted Power Source (UPS) were provided with strain relief to prevent pull from being directly transmitted to joints or terminal screws. The insulation on both flexible cords was frayed and/or disconnected from the housing of the plug.