Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1413407.015
Citation: 01002C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $11,934.00
Current Penalty: $0.00
Issuance Date: 10/23/2019
Nr Instances: 1
Nr Exposed: 5
Abatement Date: 12/11/2019
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 11/12/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/12/2019 | $0.00 | 12/11/2019 | Serious | |
| Penalty | Z: Issued | 10/23/2019 | $11,934.00 | 12/11/2019 | Serious |
Text For Citation: 01 Item/Group: 002C Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: a) On or about July 8, 2019 on the Ferry 280 and Ferry 330 mold machines, employees, such as operators performing set up activities, did not lockout the electrical and pneumatic disconnects when making mold changes. Employees were not required to: (1) turn off and shut down the machines, (2) physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the electric and pneumatic energy sources, (3) affix lockout or tagout devices to each energy isolating device, (4) verify effectiveness of energy isolation.