Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1345781.015
Citation: 01002C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $12,934.00
Current Penalty: $0.00
Issuance Date: 01/17/2019
Nr Instances: 3
Nr Exposed: 15
Abatement Date: 05/07/2019
Gravity: 10
Report ID: 0524700
Contest Date:
Final Order: 02/07/2019
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/07/2019 | $0.00 | 05/07/2019 | Serious | |
| Penalty | Z: Issued | 01/17/2019 | $12,934.00 | 01/29/2019 | Serious |
Text For Citation: 01 Item/Group: 002C Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): A) Autoplas Division, Windsor Mold Group, located at 560 Goodrich Road, Bellevue, OH 44811: On or about September 10, 2018, the employer did not ensure that all the steps outlined in 29 CFR 1910.147(d), required for the control of the hazardous energy sources, were performed. Employees did not deenergize the hydraulic 2200 Ton Engel Press # 16 (Model: Duo 2200; Serial # 178920) prior to working inside the press while checking part numbers, connecting air lines, and checking the valve gates. Employees were exposed to struck-by and caught in-between hazards while performing these tasks. B) Autoplas Division, Windsor Mold Group, located at 560 Goodrich Road, Bellevue, OH 44811: On or about September 10, 2018, the employer did not ensure that all the steps outlined in 29 CFR 1910.147(d), required for the control of the hazardous energy sources, were performed. Employees did not deenergize equipment such as, but not limited to, the Fanuc Robot (Type: R2000iA/165F) at the hydraulic 2200 Ton Engel Press # 16 prior to performing activities such as, but not limited to, troubleshooting the robotic arm and cleaning inside the robot's cage. Employees were exposed to struck-by hazards while performing these tasks. C) Autolas Division, Windsor Mold Group, located at 560 Goodrich Road, Bellevue, OH 44811: On or about September 14, 2018, the employer did not ensure that all the steps outlined in 29 CFR 1910.147(d), required for the control of the hazardous energy sources, were performed. Employees did not deenergize the hydraulic 1000 Ton Demag Press # 13 (Model: Titan 900; Serial # 0508) and the Fanuc Robot (Type: R-2000iB/165F) at the Press # 13 prior to performing activities such as, but not limited to, rearranging air lines inside the mold and working inside the robot's cage. Employees were exposed to struck-by and caughtin-between hazards while performing these tasks.