Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1340853.015
Citation: 01002C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $8,315.00
Current Penalty: $0.00
Issuance Date: 10/19/2018
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 03/15/2019
Gravity: 5
Report ID: 0522300
Contest Date:
Final Order: 11/13/2018
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $0.00 | 03/15/2019 | Serious | ||
| Penalty | I: Informal Settlement | 11/13/2018 | $0.00 | 12/31/2018 | Serious | |
| Penalty | Z: Issued | 10/19/2018 | $8,315.00 | 11/08/2018 | Serious |
Text For Citation: 01 Item/Group: 002C Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about August 21, 2018, employees were exposed to unguarded rotating parts and ingoing nip points at the Deacro slitter machines model C610-165, serial number 1895-662 and model C610E-165, serial number 2345-868 and the Kidder slitter machine model SBM 25, serial number S1045495. On both the entry feed and exit sides of the slitter machines there are operator controls near the rotating rolls with ingoing nip points and point of operation hold down sections.