Violation Detail
Standard Cited: 19260062 D02 I Lead
Inspection Nr: 1232868.015
Citation: 01002C
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 11/14/2017
Nr Instances: 1
Nr Exposed: 8
Abatement Date: 01/30/2018
Gravity:
Report ID: 0215800
Contest Date:
Final Order: 12/20/2017
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 12/20/2017 | $0.00 | 01/30/2018 | Other | |
Penalty | Z: Issued | 11/14/2017 | $0.00 | 12/11/2017 | Serious |
Text For Citation: 01 Item/Group: 002C Hazard:
29 CFR 1926.62(d)(2)(i): Until the employer performed an employee exposure assessment, as required in 29 CFR 1926.62(d), and documented that the employee(s) performing any of the listed tasks was not exposed above the Permissible Exposure Limit (PEL), the employer did not treat affected employee(s) as if they were exposed above the PEL, and not in excess of ten times the PEL, and did not implement employee protective measures prescribed in 29 CFR 1926.62(d)(2)(v): a) At the worksite, on or about 5/9/17: An employee was stripping a metal clad door with a metal brush on a hand held grinder while other workers were in close proximity and where the employer did not perform an exposure assessment to determine employee's exposure to lead, nor were any precautions taken during or following this project. Sampling determined that Lead was present at .0545 %.