Translate
Violation Detail
Standard Cited: 19100147 D03 The control of hazardous energy (lockout/tagout).
Inspection Nr: 1161984.015
Citation: 01002C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 12/27/2016
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 01/26/2017
Gravity: 10
Report ID: 0521100
Contest Date: 01/18/2017
Final Order: 01/02/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 01/02/2018 | $0.00 | 01/26/2017 | Serious | |
| Penalty | C: Contested | 01/23/2017 | $0.00 | 01/26/2017 | Serious | |
| Penalty | Z: Issued | 12/27/2016 | $0.00 | 01/26/2017 | Serious |
Text For Citation: 01 Item/Group: 002C Hazard:
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): (a) On or about June 29, 2016, employees would not keep equipment de-energized during setup of molding machines on Lines #1-12. Employees would routinely re-energize the machines to make adjustments and gauge material with the equipment running. (b) On or about June 29, 2016, an employee did not lockout the Michael Weinig Hydromat 22AL molding machine on Line #12, and instead utilized a clasp and lock on an emergency stop button rather than the electrical disconnect.