Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1736947.015
Citation: 01002B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $11,524.00
Current Penalty: $0.00
Issuance Date: 08/16/2024
Nr Instances: 2
Nr Exposed: 5
Abatement Date: 10/07/2024
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 09/13/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/13/2024 | $0.00 | 10/07/2024 | Serious | |
| Penalty | Z: Issued | 08/16/2024 | $11,524.00 | 10/07/2024 | Serious |
Text For Citation: 01 Item/Group: 002B Hazard:
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle. At an establishment located at 502 Highway 67 in Kiel, Wisconsin: a) In the Machine Center/Tool Shop, employees operating the Milltronics RH33 CNC vertical bed mill (Serial # RH32100141AEEAB) were exposed to entanglement and crushing hazards created by the vertical, horizontal, and rotating movements of the machine at the point of contact between the tool and work piece. b) In the Machine Shop/Tool Room, employees operating the Milltronics MB20-A series C CNC milling machine (Asset # 80-104) were exposed to entanglement hazards created by the rotating tooling of the machine. The machine was not effectively guarded to prevent exposure to these hazards.