Translate
Violation Detail
Standard Cited: 19100333 A01 Selection and use of work practices
Inspection Nr: 1705982.015
Citation: 01002B
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/15/2024
Nr Instances: 1
Nr Exposed: 1
Abatement Date:
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 04/15/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/15/2024 | $0.00 | Serious | ||
| Penalty | Z: Issued | 03/15/2024 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 002B Hazard:
29 CFR 1910.333(a)(1):"Deenergized parts." Live parts to which an employee may be exposed shall be deenergized before the employee works on or near them, unless the employer can demonstrate that deenergizing introduces additional or increased hazards or is infeasible due to equipment design or operational limitations. Live parts that operate at less than 50 volts to ground need not be deenergized if there will be no increased exposure to electrical burns or to explosion due to electric arcs. a) On or about October 4, 2023 at the Giddings and Lewis Mill hydraulic unit, employees were exposed to live parts when adding oil and working on the hydraulic unit due to a live 480-volt cable being present with the conduit cut open.