Violation Detail
Standard Cited: 19100146 E01 Permit-required confined spaces
Inspection Nr: 1582258.015
Citation: 01002B
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 08/05/2022
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 09/12/2022
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 09/02/2022
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 09/02/2022 | $0.00 | 09/12/2022 | Other | |
Penalty | Z: Issued | 08/05/2022 | $0.00 | 09/12/2022 | Serious |
Text For Citation: 01 Item/Group: 002B Hazard:
29 CFR 1910.146(e)(1): Before entry is authorized, the employer shall document the completion of measures required by paragraph (d)(3) of this section by preparing an entry permit. NOTE: Appendix D to section 1910.146 presents examples of permits whose elements are considered to comply with the requirements of this section. At an establishment located at N2467 Vaughan Road, in Waupaca, Wisconsin; in the Paint Area; the employer did not document the completion of measure taken prior to entry into the Blue-Surf Oven to remove the sheet of metal on the bottom of the elevated oven floor and remove small parts which had fallen from the conveyor line. The gas line was not properly isolated prior to entry.