Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 1566871.015
Citation: 01002B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,324.00
Current Penalty: $0.00
Issuance Date: 06/02/2022
Nr Instances: 5
Nr Exposed: 172
Abatement Date: 01/03/2023
Gravity: 5
Report ID: 0316700
Contest Date:
Final Order: 06/21/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/21/2022 | $0.00 | 01/03/2023 | Serious | |
| Penalty | Z: Issued | 06/02/2022 | $9,324.00 | 06/21/2022 | Serious |
Text For Citation: 01 Item/Group: 002B Hazard:
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees from hazards associated with struck by hazards: a. Recut Area - On or about December 3, 2021, the pallet racks lining the outside of the recut area were not evaluated and marked for capacity in accordance with MH16.1, thereby exposing employees to a caught in and struck by hazard. b. Recut Area - On or about December 3, 2021, the pallet rack leg behind the single mandrel PACO recut saws was damaged and not reevaluated in accordance with MH16.1, thereby exposing employees to a caught in and struck by hazard. c. 3.5 inch area - On or about February 22, 2022, the pallet rack connector was damaged and had a welding scar on the face and was not taken out of service in accordance with MH16.1, thereby exposing employees to a caught in and struck by hazard. d. 1 CTNS area - On or about February 22, 2022, the pallet rack leg was damaged and not reevaluated in accordance with MH16.1, thereby exposing employees to a caught in and struck by hazard. e. Between shipping doors 10 and 11 - On or about February 22, 2022, the pallet rack leg was damaged and not reevaluated in accordance with MH16.1, thereby exposing employees to a caught in and struck by hazard. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.