Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1558518.015
Citation: 01002B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $12,288.00
Current Penalty: $0.00
Issuance Date: 12/07/2021
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 12/27/2021
Gravity: 10
Report ID: 0522500
Contest Date:
Final Order: 02/07/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/07/2022 | $0.00 | 12/27/2021 | Serious | |
| Penalty | Z: Issued | 12/07/2021 | $12,288.00 | 12/27/2021 | Serious |
Text For Citation: 01 Item/Group: 002B Hazard:
29 CFR 1910.147(d): The established procedures for the application of energy control (the lockout or tagout procedures) was not done in sequence as required by 29 CFR 1910.147(d)(1) through (d)(6): a. On or about October 18, 2021, located in the Cut Shop, an employee was exposed to machine hazards associated with moving parts and in-going nip points while unjamming boards in the Timberland stacker machine. The employer did not implement energy control application steps as the machine was not shut down and turned off to perform the work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)] and verification of isolation [(d)(6)], were not implemented to protect the employee from machine servicing hazards.