Translate
Violation Detail
Standard Cited: 19100212 A03 III General requirements for all machines.
Inspection Nr: 1415958.015
Citation: 01002B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 12/02/2019
Nr Instances: 1
Nr Exposed: 9
Abatement Date: 01/21/2020
Gravity: 5
Report ID: 0522300
Contest Date:
Final Order: 01/14/2020
Related Event Code (REC): C;R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/14/2020 | $0.00 | 01/21/2020 | Serious | |
| Penalty | Z: Issued | 12/02/2019 | $0.00 | 01/21/2020 | Serious |
Text For Citation: 01 Item/Group: 002B Hazard:
29 CFR 1910.212(a)(3)(iii): Special hand tools for placing and removing material(s) was not provided to permit easy handling of material without the operator placing a hand in the danger zone: On or about July 17, 2019 and at times prior to, at the location of 1331 Kelly Ave, Akron OH 44306, on the production floor, employees required to removed jams caused by hardened, cooled polymer from the mouth of the plastic extruder, Machine #EX-2 (Serial Number 4541) with a putty knife approximately four inches long were exposed to thermal hazards when heated, melted plastic had built up along the mouth of the extruder which was approximately four feet wide.