Translate
Violation Detail
Standard Cited: 19100030 A03 Training requirements.
Inspection Nr: 1321124.015
Citation: 01002B
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 07/24/2018
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 09/18/2018
Gravity:
Report ID: 0112600
Contest Date:
Final Order: 08/22/2018
Related Event Code (REC): A;R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/22/2018 | $0.00 | 09/18/2018 | Other | |
| Penalty | Z: Issued | 07/24/2018 | $0.00 | 09/10/2018 | Serious |
Text For Citation: 01 Item/Group: 002B Hazard:
29 CFR 1910.30(a)(3): The employer did not train each employee in at least the following topics: The nature of the fall hazards in the work area and how to recognize them; the procedures to be followed to minimize those hazards; the correct procedures for installing, inspecting, operating, maintaining, and disassembling the personal fall protection systems that the employee uses; and the correct use of personal fall protection systems and equipment specified in paragraph (a)(1) of this section, including, but not limited to, proper hook-up, anchoring, and tie-off techniques, and methods of equipment inspection and storage, as specified by the manufacturer. (a) Site: On the one story roof, south side, at 1 Envelope Terrace Worcester, MA 01604, on 5/31/2018, and at times earlier, the employer did not train each employee in at least the following topics: The nature of the fall hazards in the work area and how to recognize them; the procedures to be followed to minimize those hazards; the correct procedures for installing, inspecting, operating, maintaining, and disassembling the personal fall protection systems that the employee uses; and the correct use of personal fall protection systems and equipment specified in paragraph (a)(1) of this section, including, but not limited to, proper hook-up, anchoring, and tie-off techniques, and methods of equipment inspection and storage, as specified by the manufacturer.