Translate
Violation Detail
Standard Cited: 19100147 C06 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1164372.015
Citation: 01002B
Citation Type: Serious
Abatement Date: 11/21/2016 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 10/04/2016
Nr Instances: 10
Nr Exposed: 6
Related Event Code (REC):
Gravity: 10
Report ID: 0626000
Contest Date:
Final Order: 10/28/2016
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/28/2016 | $0.00 | 11/21/2016 | Serious | |
| Penalty | Z: Issued | 10/04/2016 | $0.00 | 11/07/2016 | Serious |
Text For Citation: 01 Item/Group: 002B Hazard:
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: At this establishment, in the plant production area, where employees were exposed to struck-by, caught-in, and electrical hazards when performing service and/or maintenance, periodic inspections of the energy control procedures at the manufacturing plant were inadequate for the following types of machines: a. Grinder and Distribution Machine System (Retech Grinder RG 42); b. Shredder and Distribution Machine System (Virtus G 45); c. Horizontal Fiber Blowing and Distribution Machine System (ProLoft 1000/HWO-41); d. CCC Fiber Opening and Distribution Machine System (ProLoft 1500/FF-60); e. Ingermac Plenums (Tec II-1012); f. Ingermac Blowers; g. Air Pressure Compressor (Kaeser DSD-125); h. Hot Air Dryers (Kaeser TG-301); i. CCS Dust Collector (FX-10-3500); and, j. Sewing Machines (Juki DDL-8700-7).