Translate
Violation Detail
Standard Cited: 19100217 B07 III Mechanical power presses.
Inspection Nr: 1631027.015
Citation: 01002A
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $13,052.00
Current Penalty: $6,526.00
Issuance Date: 12/15/2022
Nr Instances: 1
Nr Exposed: 1
Abatement Date:
Gravity: 10
Report ID: 0524700
Contest Date:
Final Order: 01/11/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/11/2023 | $6,526.00 | Serious | ||
| Penalty | Z: Issued | 12/15/2022 | $13,052.00 | Serious |
Text For Citation: 01 Item/Group: 002A Hazard:
29 CFR 1910.217(b)(7)(iii): A means of selecting Off, "Inch," Single Stroke, and Continuous (when the continuous function is furnished) was not supplied with the clutch/brake control to select type of operation of the press. Fixing of selection was not by means capable of supervision by the employer. a. CQT Kennedy, LLC, worksite located at 1260 Industrial Drive, Van Wert, Ohio 45891: on or about October 27, 2022, the employer did not ensure Chicago part revolution mechanical power press, Model 810 L, S/N L18558, cycle selection switch keys were under the control of a supervisor. During set up and production, an operating employee with unabated access to inch mode selection was exposed to amputation hazards.