Translate
Violation Detail
Standard Cited: 19100029 B01 Fall protection systems and falling object protection-criteria and practices.
Inspection Nr: 1419314.015
Citation: 01002A
Citation Type: Serious
Abatement Date: 01/24/2020 2
Initial Penalty: $10,418.00
Current Penalty: $0.00
Issuance Date: 11/22/2019
Nr Instances: 1
Nr Exposed: 5
Related Event Code (REC): R
Gravity: 5
Report ID: 0728900
Contest Date:
Final Order: 12/18/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/18/2019 | $0.00 | 01/24/2020 | Serious | |
| Penalty | Z: Issued | 11/22/2019 | $10,418.00 | 12/19/2019 | Serious |
Text For Citation: 01 Item/Group: 002A Hazard:
29 CFR 1910.29(b)(1): The top edge height of top rails, or equivalent guardrail system members, were not 42 inches, plus or minus 3 inches, above the walking-working surface: The employer is failing to ensure employees are protected from fall hazards associated working on a storage racking system. This was most recently evident during the inspection conducted on July 30, 2019 at a worksite located at 8901 Irvington Rd, Omaha, NE 68122. Employees routinely access an outdoor 2-story vehicle parts storage rack system to store or retrieve various parts. There is a ramp along the outer edge of the system that allows employees to roll a cart to the different levels. There is an existing rail that does not meet the requirements of a top rail. Distance from the top ramp to the ground is approximately 17.5 feet.