Translate
Violation Detail
Standard Cited: 19100029 J Fall protection systems and falling object protection-criteria and practices.
This violation item has been deleted.
Inspection Nr: 1208858.015
Citation: 01002A
Citation Type: Serious
Abatement Date: 08/21/2017 6
Initial Penalty: $9,054.00
Current Penalty: $0.00
Issuance Date: 07/13/2017
Nr Instances: 1
Nr Exposed: 10
Related Event Code (REC): C
Gravity: 5
Report ID: 0521400
Contest Date: 08/07/2017
Final Order: 08/01/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 08/01/2018 | $0.00 | 08/21/2017 | Serious | |
| Penalty | C: Contested | 08/08/2017 | $9,054.00 | 08/21/2017 | Serious | |
| Penalty | Z: Issued | 07/13/2017 | $9,054.00 | 08/21/2017 | Serious |
Text For Citation: 01 Item/Group: 002A Hazard:
29 CFR 1910.29(j): Body belts, harnesses, and other components used in personal fall arrest systems, work positioning systems, and travel restraint systems must meet the requirements of 29 CFR 1910.140: On or about 25 April 2017 to 01 May 2017, the employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was adequately protected from falling. The employers system of fall protection incorporated a webbing pull back device that would become compromised if an employee fell over an edge. The webbing would likely be frayed or cut, resulting in a fall of approximately 30 feet while working in rack systems and also conveyor systems. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).