Translate
Violation Detail
Standard Cited: 19100147 A02 II A The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1198411.015
Citation: 01002A
Citation Type: Serious
Abatement Status:
Initial Penalty: $5,070.00
Current Penalty: $0.00
Issuance Date: 03/28/2017
Nr Instances: 2
Nr Exposed: 3
Abatement Date: 04/21/2017
Gravity: 10
Report ID: 0213900
Contest Date:
Final Order: 04/13/2017
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/13/2017 | $0.00 | 04/21/2017 | Serious | |
| Penalty | Z: Issued | 03/28/2017 | $5,070.00 | 04/21/2017 | Serious |
Text For Citation: 01 Item/Group: 002A Hazard:
29 CFR 1910.147(a)(2)(ii)(B): Lockout/tagout procedures were not implemented when servicing and/or maintenance was taking place during normal production operations when an employee (s) was required to place any part of his or her body into area on a machine or piece of equipment where work was actually performed upon the material being processed (point of operation) or where an associated danger zone existed during a machine operating cycle: a) Woodland Manufacturing - SE Chang Machine: Employees were required to place their hands into the point of operation of the SE Chang Corrugated Carton Flexo Printing Machine. An employee suffered an amputation while cleaning the roll of the machine. Occurred on or about 12/16/2016. b) Woodland Manufacturing - EMBA Box Machine: An employee suffered crushing injuries when he was placing part of his body on or near pinch points while connecting the glue feeder to the EMBA machine # 634002. Another employee was performing set up operations on the EMBA Machine at the same time, which caused the machine to cycle while the other employee was exposed to pinch points. Occurred on 01/16/2017.