Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1009239.015
Citation: 01002A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,000.00
Current Penalty: $7,000.00
Issuance Date: 05/19/2015
Nr Instances: 1
Nr Exposed: 70
Abatement Date: 02/29/2016
Gravity: 10
Report ID: 0521400
Contest Date: 06/09/2015
Final Order: 09/03/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $7,000.00 | 02/29/2016 | Serious | ||
| Penalty | F: Formal Settlement | 09/03/2015 | $7,000.00 | 10/15/2015 | Serious | |
| Penalty | C: Contested | 06/10/2015 | $7,000.00 | 06/21/2015 | Serious | |
| Penalty | Z: Issued | 05/19/2015 | $7,000.00 | 06/21/2015 | Serious |
Text For Citation: 01 Item/Group: 002A Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) were not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): (a) Production, grinding department - employees assigned to perform setup tasks in CNC creep feed grinding and CNC vertical milling machines had their finger(s) and hand(s) exposed to caught in-between and entanglement hazards capable of causing amputations where an orderly shutdown of the equipment was not carried out. (b) Production, grinding department - employees assigned to perform adjustments in CNC creep feed grinding and CNC vertical milling machines had their finger(s) and hand(s) exposed to caught in-between and entanglement hazards capable of causing amputations where an orderly shutdown of the equipment was not carried out. The configuration, programming and use of the access door interlock devices (alternative measures) did not provide effective protection. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).