Translate
Violation Detail
Standard Cited: 19100132 D01 General requirements.
Inspection Nr: 1001202.015
Citation: 01002A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,300.00
Current Penalty: $4,410.00
Issuance Date: 01/16/2015
Nr Instances: 2
Nr Exposed: 1
Abatement Date: 02/12/2015
Gravity: 10
Report ID: 0214200
Contest Date:
Final Order: 02/13/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/13/2015 | $4,410.00 | 02/12/2015 | Serious | |
| Penalty | Z: Issued | 01/16/2015 | $6,300.00 | 02/12/2015 | Serious |
Text For Citation: 01 Item/Group: 002A Hazard:
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): Building 4, 72 Lockwood Street, Newark, NJ a) The employer failed to perform a hazard assessment for a mechanic performing live voltage testing on equipment using only safety glasses. During repair of the Pulva-Sizer Size B mill, an employee used a Fluke 77 Series II Multimeter to test 240 Volt three phase circuit conductors inside of the A-B Grinder Side B # 4067 switchbox to determine if the Techtool Premium 20 Horsepower motor was correctly powered. Violation occurred on or around 8-15-14. b) The employer failed to perform a hazard assessment for a mechanic performing live voltage testing on equipment using only safety glasses. When the mechanic tried to repair the Model Number A-2 and Serial Number 2056 Pulva-Sizer Size A mill, the worker used an Amprobe Ultra Amperage meter inside of the A-B switchbox to determine if the Pulva-Sizer 5 horsepower motor was correctly powered. Violation occurred on or around 9-15-14.