Violation Detail
Standard Cited: 618037501 Nevada General Duty Clause
Inspection Nr: 311643068
Citation: 01002
Citation Type: Serious
Abatement Status: I
Initial Penalty: $2,500.00
Current Penalty: $1,875.00
Issuance Date: 06/17/2008
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 06/20/2008
Gravity: 10
Report ID: 0953220
Contest Date: 07/11/2008
Final Order: 07/14/2008
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | L: State Settlement | 07/14/2008 | $1,875.00 | 06/20/2008 | Serious | |
| Penalty | Z: Issued | 06/17/2008 | $2,500.00 | 06/20/2008 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard: LIFTING
Nevada Revised Statute 618.375(1): Duties of employers. The employer failed to furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to his employees: The employer did not ensure that the steel cable wrapped around the cable drum of a winch was not replaced with a 4 inch wide polyester webbing sling, as follows: a.At the Cosmopolitan Condo Hotel, 3708 Las Vegas Blvd., South, Las Vegas, NV 89109, 5th floor balcony on the north side, window installation activities, Employee #1 was exposed to overhead hazards while operating a winch that had been attached to the underside of a custom design support structure. The steel cable wrapped around the winch cable drum was replaced with a 4 inch wide polyester webbing sling. The employer did not follow the manufacturer's warnings and precautions as noted in the Assembly and Operating Instructions manual. Reference: Chicago Electric Power Tools, 5,500 LB. Winch With Roller Fairlead, Model 91780, Assembly and Operating Instructions, Specific Winch Warnings and Precautions. Page 4, Item 25: Do not replace the Steel Cable with ropes or fiberglass straps. This Winch is only designed to work with the 1/4" Steel Cable provided. One feasible means of abatement would be to remove the winch from the support structure and replace it with a hoist approved for material lifting.
Translate