Violation Detail
Standard Cited: 95012901
Inspection Nr: 307216887
Citation: 01002
Citation Type: Serious
Abatement Status: X
Initial Penalty: $6,300.00
Current Penalty:
Issuance Date: 05/07/2004
Nr Instances: 1
Nr Exposed: 30
Abatement Date: 06/24/2004
Gravity:
Report ID: 0453710
Contest Date: 06/02/2004
Final Order: 12/19/2007
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 12/19/2007 | 06/24/2004 | Serious | ||
| Penalty | Z: Issued | 05/07/2004 | $6,300.00 | 06/24/2004 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard: DUST&FUMES
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to risk of fire or explosion in that: a)buffing area- a dry-type dust collector, connected to the scratcher operation, was located inside the buffing area. Abatement Note: One feasible abatement method is to move the dry-type dust collector outdoors. (Reference: NFPA 484 Standard for Combustible Metals, Metal Powders, and Metal Dusts, 2002 Edition, Chapter 4, Section 4.3.2.5; NFPA 651 Standard for the Machining and Finishing Aluminum and the Production and Handling of Aluminum Powders, 1998 Edition, Chapter 4, Section 4-2.4; NFPA 65 Code for the Processing and Finishing of Aluminum, 1963 Edition, Chapter 2, Section 241.)on
Translate