Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 306315771
Citation: 01002
Citation Type: Serious
Abatement Status: X
Initial Penalty: $2,000.00
Current Penalty: $1,250.00
Issuance Date: 09/10/2004
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 10/13/2004
Gravity: 03
Report ID: 0215800
Contest Date: 09/20/2004
Final Order: 10/15/2007
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 10/15/2007 | $1,250.00 | 10/13/2004 | Serious | |
| Penalty | Z: Issued | 09/10/2004 | $2,000.00 | 10/13/2004 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard: FALLING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to A FALL HAZARD: a)Infeed Department, on or about 3/11/04: The anchorage support beam used for the retractable lanyard fall arrest system had not been rated. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: Certify the anchorage support beam in accordance with ANSI Z359.1-1992, Section 3.2.5.1. Abatement certification must be submitted for this item.
Translate