Translate
Violation Detail
Standard Cited: 880004 General Duty Clause
This violation item has been deleted.
Inspection Nr: 303741391
Citation: 01002
Citation Type: Serious
Abatement Status: X
Initial Penalty: $1,500.00
Current Penalty: $1,500.00
Issuance Date: 07/23/2001
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 09/07/2001
Gravity: 10
Report ID: 0751910
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/23/2001 | $1,500.00 | 09/07/2001 | Serious | |
| Penalty | Z: Issued | 07/23/2001 | $1,500.00 | 09/07/2001 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard: CUTS
Section 88.4 - Code of Iowa (2001) 88.4: Employer did not furnish to each of the employer's employees employment and a place of employment which is free from recognized hazards that are causing or are likely to cause death or serious physical harm to employee in that employees were exposed to: (a)City of Sanborn - S&H Solid Waste installed a new hydraulic cylinder on a piece of mobile equipment. The hook and cable were not properly placed in the manufacturers designated bracket when not in use. This condition exposes employees to hazards, such as amputations and/or lacerations when the hook is placed on the same grab bar the employee uses to steady himself when the truck is moving. Among other methods, one feasible and acceptable abatement method to correct this hazard is to train and supervise employees to use the manufactures designated bracket that came with the truck. ANSI Z- 245.1 - 1984 6.1. This violation was noted on or about 4-3-01.