Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 302398169
Citation: 01002
Citation Type: Serious
Abatement Date: 03/27/2001 X
Initial Penalty: $4,900.00
Current Penalty: $1,000.00
Issuance Date: 02/07/2001
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): A
Gravity: 10
Report ID: 0419400
Contest Date:
Final Order:
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/27/2001 | $1,000.00 | 03/27/2001 | Serious | |
| Penalty | Z: Issued | 02/07/2001 | $4,900.00 | 03/27/2001 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard: LOCKOUT
Section 5(a)(1) of Public Law 91-596, the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to: Hazard of being struck by machinery or equipment from the unexpected energization or start up of machines or equipment. (a)County Road 189 - On October 2, 2000 the JT606 Sure Bore Machine was not locked out during the breaking of the stems to prevent the unexpected energization of the boring machine. One feasible and acceptable abatement method, among others, to correct this hazard would be to implement a lockout/tagout procedure as prescribed in Section 3.1.2 of ANSI Z244.1-1982, entitled American National Standard for Personnel Protection - Lockout/Tagout of Energy Sources - Minimum Safety Requirements.