Text For Citation: 01 Item/Group: 002 Hazard:

29 CFR 1910.305(e)(1): Cabinets, cutout boxes, fittings, boxes, and panelboard enclosures. Cabinets, cutout boxes, fittings, boxes, and panelboard enclosures in damp or wet locations shall be installed so as to prevent moisture or water from entering and accumulating within the enclosures and shall be mounted so there is at least 6.35-mm (0.25-in.) airspace between the enclosure and the wall or other supporting surface. However, nonmetallic enclosures may be installed without the airspace on a concrete, masonry, tile, or similar surface. The enclosures shall be weatherproof in wet locations. On or about December 9, 2025, at an establishment located at 5800 West Drive in Manitowoc, Wisconsin:, in the Compounding Household Blending Department, near the storage tank 47 interface panel, the employer failed to ensure a junction box installed in a wet environment where water could enter or accumulate was enclosed and weatherproof.