Translate
Violation Detail
Standard Cited: 19100178 P01 Powered industrial trucks.
Inspection Nr: 1840818.015
Citation: 01002
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,620.00
Current Penalty: $3,310.00
Issuance Date: 09/30/2025
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 10/29/2025
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 11/20/2025
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/20/2025 | $3,310.00 | 10/29/2025 | Serious | |
| Penalty | Z: Issued | 09/30/2025 | $6,620.00 | 10/29/2025 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.178(p)(1): If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck shall be taken out of service until it has been restored to safe operating condition. On or about July 30, 2025, at an establishment located at 242 South Pearl Street, in Berlin, Wisconsin, in the Fabrication Area, (a) Employees were exposed to hazards related to powered industrial vehicle operations while utilizing the Yale #39 forklift, GLC080LINGAE088, S/N: D818V02479C, which was missing chunks of rubber, missing strips of rubber, tire wear to safety line on the front left side, rear left side, and rear right side. (b) Employees were exposed to struck by hazards while utilizing the Yale #39 forklift, GLC080LINGAE088, S/N: D818V02479C, when the fork assembly pin was not secured on the left side to prevent the fork from becoming loose or dislodging from the carriage during operation. (c) Employees were exposed to struck by hazards while operating the Yale #39 forklift, GLC080LINGAE088, S/N: D818V02479C, which had a small cut across the fork and holes in the forks that would diminish the forks strength.