Text For Citation: 01 Item/Group: 002 Hazard:

29 CFR 1910.147(c)(6): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed: Employees engaged in servicing and maintenance activities at the following equipment in the fabrication department shop/area, and throughout the different buildings of the plant were exposed to burn, electrical, struck-by, caught-in and caught-between hazards in that machine specific energy control procedures had not been reviewed since 2010 to correct any deviations or inadequacies identified in the procedure, to ensure the procedures are still up to date, correctness, and being followed, implemented. Employees perform servicing and maintenance activities on equipment including, but not limited to, Rousselle Press machine (Model 6F; Serial FF-509-64), Rousselle A4 Twisted Die Press machine (Model 3; Serial DA-6904), and Summit 100-Ton Press machine (Model A9) which had multiple energy sources including pneumatic, mechanic, electric, and gravity.