Text For Citation: 01 Item/Group: 002 Hazard:

29 CFR 1910.147(d): The application of energy control (lockout or tagout) actions were not done in the following sequence: (1) prepare for shutdown, (2) shut down machine or equipment, (3) physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the energy source, (4) affix lockout or tagout devices to each energy isolating device by authorized employee, (5) relieve, disconnect, restrain or otherwise render safe all stored or residual energy, (6) verify that isolation and de-energization of the machine or equipment have been accomplished: On or about July 8, 2024, an employee was performing servicing and maintenance on machine known as H641. The employee did not de-energize all energy sources and lock out the machine prior to servicing and maintenance activities. The Employee was exposed to unexpected start-up of the machine resulting in broken bones. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).