Translate
Violation Detail
Standard Cited: 19260451 A06 General requirements.
Inspection Nr: 1754078.015
Citation: 01002
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,098.00
Current Penalty: $5,000.00
Issuance Date: 12/04/2024
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 01/08/2025
Gravity: 10
Report ID: 0830300
Contest Date: 12/19/2024
Final Order: 05/21/2025
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/21/2025 | $5,000.00 | 01/08/2025 | Serious | |
| Penalty | C: Contested | 12/20/2024 | $7,098.00 | 01/08/2025 | Serious | |
| Penalty | Z: Issued | 12/04/2024 | $7,098.00 | 01/08/2025 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person and were not constructed and loaded in accordance with that design: (a) On June 7, 2024, at a construction site located at or near SW of I-94, exit 208, the employer was using a personnel/platform attached to a JLG SKY TRAK 8042 rough terrain forklift to raise and lower personnel for the installation of roof trusses, where the platform width extended more than 10 inches beyond the width of the forklift wheelbase. Abatement Note: Among other methods, one feasible and acceptable abatement method to correct this hazard is to ensure that all platforms used for elevating personnel with a rough terrain forklift truck comply with the design requirements specified in ANSI/ITSDF B56.6-2011, American National Standards Institute/Industrial Truck Standards Development Foundation, "Safety Standards for Rough Terrain Forklift Trucks", Section 8.24.1, Platforms for Elevating Personnel, in the following areas: (1)Paragraph (b) which states, "floor dimensions which shall not exceed two times the load center distance listed on the rough terrain forklift truck nameplate, measured parallel to the longitudinal center plane of the truck, nor have a length greater than the overall width of the truck measured across the load bearing tires plus 10 in. (250 mm) on either side. (2) Paragraph (f) which states, "information prominently indicated on the platform: (1) maximum workload including personnel and equipment; (2) weight of empty platform."