Violation Detail
Standard Cited: 19260501 B10 Duty to have fall protection.
Inspection Nr: 1608955.015
Citation: 01002
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $4,351.00
Current Penalty: $4,000.00
Issuance Date: 07/28/2022
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 09/21/2022
Gravity: 10
Report ID: 0728900
Contest Date:
Final Order: 08/31/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/31/2022 | $4,000.00 | 09/21/2022 | Serious | |
| Penalty | Z: Issued | 07/28/2022 | $4,351.00 | 08/23/2022 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1926.501(b)(10):"Roofing work on Low-slope roofs." Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see Appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted. The employer failed to protect employees from fall hazards. This was most recently documented on or about July 20th, 2022, in Omaha, Nebraska 68108. An employee was observed conducting framing operations on a commercial structure at heights greater than 30ft without any means of fall protection.
Translate