Translate
Violation Detail
Standard Cited: 19100304 C03 I Wiring design and protection.
This violation item has been deleted.
Inspection Nr: 1593526.015
Citation: 01002
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $10,151.00
Current Penalty: $0.00
Issuance Date: 10/19/2022
Nr Instances: 1
Nr Exposed: 3
Abatement Date:
Gravity: 10
Report ID: 0626000
Contest Date:
Final Order: 11/14/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/14/2022 | $0.00 | Serious | ||
| Penalty | Z: Issued | 10/19/2022 | $10,151.00 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.304(c)(3)(i):Service conductors installed as open conductors or multiconductor cable without an overall outer jacket shall have a clearance of not less than 914 mm (3.0 ft) from windows that are designed to be opened, doors, porches, balconies, ladders, stairs, fire escapes, and similar locations. However, conductors that run above the top level of a window may be less than 914 mm (3.0 ft) from the window. Vertical clearance of final spans above, or within 914 mm (3.0 ft) measured horizontally of, platforms, projections, or surfaces from which they might be reached shall be maintained in accordance with paragraph (c)(2) of this section. On or about April 25, 2022, at this location, clutter was in front of the electrical panel boxes. This exposed employees to electrical hazards.