Translate
Violation Detail
Standard Cited: 19100147 C01 The control of hazardous energy (lockout/tagout).
Inspection Nr: 1534207.015
Citation: 01002
Citation Type: Serious
Abatement Date: 01/12/2022 2
Initial Penalty: $3,901.00
Current Penalty: $2,000.00
Issuance Date: 11/23/2021
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 5
Report ID: 0521700
Contest Date:
Final Order: 12/06/2021
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/06/2021 | $2,000.00 | 01/12/2022 | Serious | |
| Penalty | Z: Issued | 11/23/2021 | $3,901.00 | 01/12/2022 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Main building, stone fabrication and water jet cutter areas - On or about June 3, 2021, the employer did not ensure an energy control program consisting of energy control procedures, employee training and periodic inspections was established for employees performing service and maintenance on machines including, but not limited to, the Park Industries Saberjet XP CNC 5 axis saw/waterjet (SN 367855) and the Flow International Corporation IFB Stonecrafter water jet cutter (SN 643699). Affected employees were thereby exposed to amputation hazards associated with moving parts.