Translate
Violation Detail
Standard Cited: 19100147 C06 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1532302.015
Citation: 01002
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $27,033.00
Current Penalty: $21,626.00
Issuance Date: 09/17/2021
Nr Instances: 7
Nr Exposed: 10
Abatement Date: 12/03/2021
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 10/07/2021
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/07/2021 | $21,626.00 | 12/03/2021 | Repeat | |
| Penalty | Z: Issued | 09/17/2021 | $27,033.00 | 10/22/2021 | Repeat |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about May 21, 2021, the employer failed to ensure that the lockout/tagout program was periodically inspected to ensure its completeness and effectiveness. Machinery that would fall under this type of program, include but is not limited to the low pressure tilt molds 1-7. Energy sources including such as electric, pneumatic, mechanical and gravitational. NOTE: The employer was previously cited for a violation of this occupational safety and health standard or it's equivalent standard which was contained in OSHA Inspection #1517390, citation 1, item 2a, which was affirmed as final order on April 16, 2021 with respect to the same workplace location.