Translate
Violation Detail
Standard Cited: 19100212 A03 III General requirements for all machines.
Inspection Nr: 1497792.015
Citation: 01002
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $2,622.00
Current Penalty: $2,100.00
Issuance Date: 12/31/2020
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 02/25/2021
Gravity: 5
Report ID: 0523400
Contest Date:
Final Order: 01/25/2021
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/25/2021 | $2,100.00 | 02/25/2021 | Serious | |
| Penalty | Z: Issued | 12/31/2020 | $2,622.00 | 01/28/2021 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(3)(iii): Special hand tools for placing and removing material(s) was not provided to permit easy handling of material without the operator placing a hand in the danger zone: (a) On or about October 16, 2020, at the worksite located at 515 Fredrick Ave., Waukesha, WI, the employer did not ensure tools for placing or removing material was provided to prevent worker exposure to either rotating machine components or rotating stock components. Employees sometimes place hands directly on rolling stock and near the point of operation while operating the Tesker model 440 thread rolling machine. ...In the alternative... 29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employees from having any part of their body in the danger zone during operating cycles: (a) On or about October 16, 2020, at the worksite located at 515 Fredrick Ave., Waukesha, WI, the employer did not ensure guarding was incorporated to prevent exposure to the point of operation on the Tesker thread rolling machines.