Translate
Violation Detail
Standard Cited: 19100147 C04 II The control of hazardous energy (lockout/tagout).
Inspection Nr: 1450126.015
Citation: 01002
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,012.00
Current Penalty: $6,308.40
Issuance Date: 03/18/2020
Nr Instances: 5
Nr Exposed: 8
Abatement Date: 05/06/2020
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 05/04/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/04/2020 | $6,308.40 | 05/06/2020 | Serious | |
| Penalty | Z: Issued | 03/18/2020 | $9,012.00 | 05/06/2020 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(c)(4)(ii): The procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A-D): (a) The energy control procedure used for the Cut Off did not provide specific procedural steps to drain air pressure nor specific requirements for testing the machine to determine and verify the effectiveness of lockout devices. (b) The energy control procedure used for the Niagara Punch Press did not provide specific procedural steps to drain air pressure nor specific requirements for testing the machine to determine and verify the effectiveness of lockout devices. (c) The energy control procedure used for the Band Saw (Marvel) did not provide specific procedural steps to address the hydraulic and pneumatic energy sources nor specific requirements for testing the machine to determine and verify the effectiveness of lockout devices. (d) The energy control procedure used for the HTC Brake Press did not provide specific procedural steps to address the hydraulic energy source. (e) The energy control procedure used for the Pacific Brake Press did not provide specific procedural steps to address the hydraulic energy source.