Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
Inspection Nr: 1443274.015
Citation: 01002
Citation Type: Serious
Abatement Date: 12/26/2019 2
Initial Penalty: $11,934.00
Current Penalty: $7,160.40
Issuance Date: 12/09/2019
Nr Instances: 1
Nr Exposed: 21
Related Event Code (REC): R
Gravity: 10
Report ID: 0522500
Contest Date:
Final Order: 01/02/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/02/2020 | $7,160.40 | 12/26/2019 | Serious | |
| Penalty | Z: Issued | 12/09/2019 | $11,934.00 | 12/26/2019 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.219(d)(1): Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes. a. On or about October 27, 2019, the employer did not ensure that the belt and pulley which was located on the power washer on Truck # 173 was guarded, which exposed employees to amputation hazards.