Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1410951.015
Citation: 01002
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $13,260.00
Current Penalty: $5,000.00
Issuance Date: 10/03/2019
Nr Instances: 1
Nr Exposed: 1
Abatement Date:
Gravity:
Report ID: 0522000
Contest Date:
Final Order: 10/22/2019
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/22/2019 | $5,000.00 | Other | ||
| Penalty | Z: Issued | 10/03/2019 | $13,260.00 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(1): "Machine guarding" Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc. a) On or about 6/21/2019 an employee was operating a SMT Tube Bender (ID 21188) and was exposed to a caught in hazard while conducting setup operations due to the lack of safe guards to protect the operator. The safety mat allowed the employee to be exposed to a caught in hazard due to the mat not working properly. The employees could activate the foot pedal while standing on the safety mat.