Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1385398.015
Citation: 01002
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,282.00
Current Penalty: $4,641.00
Issuance Date: 05/16/2019
Nr Instances: 2
Nr Exposed: 2
Abatement Date: 07/25/2019
Gravity: 10
Report ID: 0112600
Contest Date:
Final Order: 06/11/2019
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/11/2019 | $4,641.00 | 07/25/2019 | Serious | |
| Penalty | Z: Issued | 05/16/2019 | $9,282.00 | 07/25/2019 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Adhesive Applications, 51 Ferry St., Easthampton, Massachusetts: On and prior to March 15, 2019 employees were exposed to laceration and amputation hazards: a. employees operating the E420NM5 baloney slicers were exposed to lacerations and amputation hazards as the cover guards had holes cut into them to allow access to the product without having to shut the machine off or lock it out. b. Lever baloney slicer in the back by the windows was not guarded to prevent access to the blades either from the front where the operator stands or in the rear of the machine while it was in operation.