Translate
Violation Detail
Standard Cited: 19100029 B01 Fall protection systems and falling object protection-criteria and practices.
Inspection Nr: 1356841.015
Citation: 01002
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $7,971.00
Current Penalty: $5,021.73
Issuance Date: 02/22/2019
Nr Instances: 1
Nr Exposed: 4
Abatement Date:
Gravity: 5
Report ID: 0418100
Contest Date:
Final Order: 03/18/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/18/2019 | $5,021.73 | Serious | ||
| Penalty | Z: Issued | 02/22/2019 | $7,971.00 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.29(b)(1): The top edge height of top rails, or equivalent guardrail system members, were not 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walkingworking surface; where the top edge height exceeded 45 inches (114 cm), the guardrail system did not meet all other criteria of paragraph (b) of this section. On or about 10/29/2018, at the Traffic Barricade Type H (TBH) form equipment located outside of the facility at 220 Cargill Road Connector, Macon, GA: Employees walking and working on the fabricated metal platform connected to the TBH form equipment top rail measured about 34 1/2 inches from the work platform surface. The employer failed to ensure the top edge height of the top guardrail system was 42 inches plus or minus 3 inches.