Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1332324.015
Citation: 01002
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,114.00
Current Penalty: $4,624.00
Issuance Date: 09/25/2018
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 10/09/2018
Gravity: 5
Report ID: 0524700
Contest Date:
Final Order: 10/18/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/18/2018 | $4,624.00 | 10/09/2018 | Serious | |
| Penalty | Z: Issued | 09/25/2018 | $7,114.00 | 10/09/2018 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a. Uni-Grip, Inc. - Upper Sandusky, Ohio: On or about July 16, 2018, employees were exposed to pinch point and rotating part hazards in that the ESI catapuller machine (s/n 1522990) was not deenergized prior to servicing tasks such as, but not limited to, setting up the machine. The employer did not ensure that energy control application steps were implemented to control the machine's electrical/mechanical energy source prior to setting up the machine; the employer did not: - Ensure that equipment was turned off or shut down. - Physically operate energy isolating devices to control energy sources and affix lockout device(s). - Verify that isolation and de-energization of the machine or equipment had been accomplished.