Arrow Acquisition, Llc | Occupational Safety and Health Administration osha.gov

Violation Detail

Standard Cited: 19100184 D Slings.

This violation item has been deleted.

Inspection Nr: 1316244.015

Citation: 01002

Citation Type: Serious

Abatement Status:

Initial Penalty: $7,760.00

Current Penalty: $0.00

Issuance Date: 09/19/2018

Nr Instances: 11

Nr Exposed: 24

Abatement Date: 10/16/2018

Gravity: 5

Report ID: 0729700

Contest Date: 11/06/2018

Final Order: 12/05/2019

Related Event Code (REC): C

Emphasis:

**Penalty and Failure to Abate Event History**
Type	Latest Event	Event Date	Penalty	Abatement Due Date	Citation Type
Penalty	F: Formal Settlement	12/05/2019	$0.00	10/16/2018	Serious
Penalty	C: Contested	11/09/2018	$7,760.00	10/16/2018	Serious
Penalty	Z: Issued	09/19/2018	$7,760.00	10/16/2018	Serious

Text For Citation: 01 Item/Group: 002 Hazard:

29 CFR 1910.184(d): Each day before being used, the sling and all fastenings and attachments shall be inspected for damage or defects by a competent person designated by the employer. Additional inspections shall be performed during sling use, where service conditions warrant. Damaged or defective slings shall be immediately removed from service: Employee(s) engaged in using chain slings to lift materials in the production department located at 16000 W. 108th Street, Lenexa, Kansas were exposed to struck-by / crushing hazards due to the chain slings and all fastenings and attachments were not inspected for damage or defects as required by a competent person in the following locations: (a) Metal chain sling in bay 1 was lifting forklift forks, the safety latches for the chain sling hook was missing. (b) Metal chain sling in bay 3 was missing safety latch on the hooks. (c) Metal chain sling in bay 4 had 2 hooks that were missing safety latches. (d) Metal chain sling on the floor in bay 7 had missing latch on one of the hooks. (e) Metal chain sling in bay 8 had two hooks that were missing safety latches. (f) Metal chain sling in bay 11 used to hold up materials had 2 hooks that were missing safety latches. (g) Metal chain sling in bay 12 had two hooks that were missing safety latches. (h) Metal chain sling in the track cutting bay (south side) had two hooks that were missing safety latches. (i) Metal chain sling being used in bay 14 had two hooks with no safety latches. (j) Metal chain sling being used in bay 15 had two hooks with no safety latches. (k) Metal chain sling in bay 16 had two hooks missing safety latches

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.