Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1209548.015
Citation: 01002
Citation Type: Serious
Abatement Date: 08/15/2017 2
Initial Penalty: $12,675.00
Current Penalty: $7,605.00
Issuance Date: 07/27/2017
Nr Instances: 8
Nr Exposed: 9
Related Event Code (REC): A
Gravity: 10
Report ID: 0626700
Contest Date:
Final Order: 10/10/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/10/2017 | $7,605.00 | 08/15/2017 | Serious | |
| Penalty | Z: Issued | 07/27/2017 | $12,675.00 | 08/15/2017 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: a) At the site, in the machining area, the employer did not provide guarding at the point of operation for a 64 inch Bullard Vertical Turret Lathe SN#: 4002, exposing employees to amputation hazards. b) At the site, in the machining area, the employer did not provide guarding at the point of operation for a 64 inch Bullard Vertical Turret Lathe SN#: 4003, exposing employees to amputation hazards. c) At the site, in the machining area, the employer did not provide guarding at the point of operation for a 54 inch Bullard Vertical Turret Lathe SN#: 4004, exposing employees to amputation hazards. d) At the site, in the machining area, the employer did not provide guarding at the point of operation for a 56 inch Bullard Vertical Turret Lathe SN#: 4005, exposing employees to amputation hazards. e) At the site, in the machining area, the employer did not provide guarding at the point of operation for a 46 inch Bullard Vertical Turret Lathe SN#: 4006, exposing employees to amputation hazards. f) At the site, in the machining area, the employer did not provide guarding at the point of operation for a 36 inch Bullard Vertical Turret Lathe SN#: 4007, exposing employees to amputation hazards. g) At the site, in the machining area, the employer did not provide guarding at the point of operation for a 32 inch Bullard Vertical Turret Lathe SN#: 4008, exposing employees to amputation hazards. h) At the site, in the machining area, the employer did not provide guarding at the point of operation for a 54 inch Bullard Vertical Turret Lathe SN#: 4101, exposing employees to amputation hazards.