Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1166939.015
Citation: 01002
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $8,017.00
Current Penalty: $4,000.00
Issuance Date: 12/02/2016
Nr Instances: 1
Nr Exposed: 2
Abatement Date:
Gravity: 5
Report ID: 0524700
Contest Date:
Final Order: 12/13/2016
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/13/2016 | $4,000.00 | Serious | ||
| Penalty | Z: Issued | 12/02/2016 | $8,017.00 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): A) Tarpstop, LLC, located at 12000 Williams Road, Perrysburg, OH 43551: On or about July 27, 2016, the employer did not ensure that employees implement energy control procedures on the KMT circular cutoff saw (Model CT 350 AV, Serial # 120589002) prior to conducting activities such as, but not limited to, changing saw blades. The KMT circular cutoff saw was not isolated from the electrical energy source prior to engaging in this maintenance activity. The employees were exposed to amputation hazards. As a result, the remaining applicable energy control elements, involving machine isolation [1910.147(d)(3)], lock-out/tag-out device application [1910.147(d)(4)], dissipation of residual energy [1910.147(d)(5)], and verification of isolation [1910.147(d)(6)], are not implemented to protect employees from machine servicing hazards such as, but not limited to, changing saw blades.