Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1163818.015
Citation: 01002
Citation Type: Serious
Abatement Date: 11/10/2016 2
Initial Penalty: $6,300.00
Current Penalty: $4,410.00
Issuance Date: 07/29/2016
Nr Instances: 1
Nr Exposed: 11
Related Event Code (REC): R
Gravity: 10
Report ID: 0728500
Contest Date:
Final Order: 08/22/2016
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $4,410.00 | 11/10/2016 | Serious | ||
| Penalty | I: Informal Settlement | 08/22/2016 | $4,410.00 | 09/23/2016 | Serious | |
| Penalty | Z: Issued | 07/29/2016 | $6,300.00 | 08/24/2016 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycles: (a) On July 19, 2016, at the facility located at 707 W HWY 60 - Monett, MO., employees were exposed to serious injuries to their hands and or fingers, in that the Point of Operation was not guarded to prevent employees from the danger zone of the operating cycles in the following instance: (1) The Accu-Press Brake Press # 71714 located in the SE section of Brake Metal Area - did not have any Safe Guards or Devices to protect the Point of Operation. (2) The Delta Rockwell Band Saw SN#1387258, in the SE section of Brake Metal Area - 2-1/2 inches of the unused portion of the cutting blade was left unguarded while cutting metal approx. 1/16th of inch thick. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.